E3METER® Power Distribution Units
The E3METER® 1300 series Power Distribution Units (PDU) are built upon very solid 2U - 19" rackmount cases.
These frames offer a high degree of flexibility as they are individually configurable on demand:
- fully passive cabling inside case (single or dual Power Group)
- highest precision current transformer (0.1% accuracy)
- backpanel (input cables, output connectors) customizable
- place for mounting up to 9 fuses on front plate (to the right of the Monitoring Module)
E3METER® Intelligent Power Monitors
Energy monitoring of all channels is handled by our E3METER® Intelligent Power Monitors (IPM) that can be swapped during operation (hot-plug). Indicators on the module frontplate summarize the power load of individual power groups.
Metering circuit and frontplate are available in different models for either single or dual (redundant) power distribution groups which makes input as well as output metering possible.
Measurement data is made available via SNMP, HTTP, TELNET through the built-in Fast Ethernet port.
Time synchronization is guaranteed by using NTP servers.
|
Two dedicated extension ports can be used to measure temperature and humidity through E3METER® remote sensors. |
Highlights |
Benefits |
|
Dual power group input metering (2 x 3PNE) up to 32 A rms per phase. Single power group output metering (with or without built-in fuses) of up to 9 channels. Supports up to two external environmental sensors (Temperature, Humidity, etc) |
Datasheet: E3METER IPM-1300_1302 (dual 32A edition)
IPM Management Information Base (MIB)
Datenblätter in Deutsch:
Datenblatt: E3METER IPM-1300-1D16_1302 (dual 16A, 1 Phase)